H2Out Water Fuel Separator Sock

print

H2Out fuel water separator sock

H2Out fuel water separator sock H2Out sock going into water and fuel H2Out sock coming out of water and fuel H2Out sock after 3 hours

SC-H2OUT-250

H2Out Water Fuel Separator Sock


  • Protect filters and engines from damage
  • Retrieve up to 250mL of water with one sock
  • Water retrieved after 24 hours
  • Non-toxic and non-hazardous material

Quantity:

MSDS: MSDS for H2Out Water Fuel Separator Sock
Downloadable Catalogue: H2Out Fuel and Water Separation Sock

This revolutionary new product innovation will assist those industries who require the removal of water from fuel tanks. The H2Out-250 will retrieve only water from fuel/hydrocarbon storage tanks.

The H2Out fuel/water separation sock is currently available in a 250mL capacity.This is the amount of water in millilitres that each sock will adsorb from fuel

What is the impact of water contamination in fuel?
The impact of the water contaminating fuel can cause filters to plug and cause serious damage to the engine's fuel system. When water and fuel are mixed, microbial growth and bio-degradation of fuel can cause fuel injector failure over time. If water is left in the fuel tank, an environment is created for rust and increases the possibility of perforation to the fuel tank.

Directions for use:
  1. Drop sock through the fill spout and ensure retrieval wire is outside the fill spout as you will be pulling the sock back through the fill spout once it has performed its function. Note fill spout should be a minimum of 40mm in diameter for retrieval as the sock will swell.
  2. Leave in tank reservoir for 24 hours.
  3. Using the retrieval cable, pull saturated sock back through the fill spout.
  4. The water saturated sock is deemed to be non-toxic and non-hazardous however it is should be disposed of in accordance with local regulations.

Suitable for those working in:
  • Agriculture
  • Automotive
  • Construction
  • Forestry
  • Marine
  • Mining
  • Transportation
ModelH2Out-250
CodeSCH2OUT250
Length19cm
Diameter after saturation6.35cm
Total dry weight54g
Water capacity250mL

This list only shows suppliers who carry this product. If the text is highlighted in Green then the company operates in that location. For a full list, please visit the Distributors page or
click here.

DISTRIBUTOR LOCATIONS LOCATIONS
Global Spill Control WA | NSW | QLD | VIC | TAS | 7
Covs Parts Pty Ltd WA | 26
Blackwoods WA | NSW | QLD | NT | SA | VIC | TAS | 64
Heatleys Safety & Industrial WA | SA | 5
AIRR WA | NSW | QLD | SA | VIC | 24